Belkin F5D6230-3 - Manual (Page 10)

Quick Set up–Configure the Router to your ISP’s settings
8
1. Using the computer that was originally connected directly to the cable or
DSL modem, launch your browser. Note: You can access the setup utility
from any computer on the network, however, use the original computer
for this procedure at this time.
2. In the address bar, type the following address: 192.168.2.1. The Router
login screen will appear.
If this is the first time you are accessing the Router, or you have not set
a password for the Router, there is no need to enter a password.
Click “Login”.