Belkin F5D6230-3 - Manual (Page 46)

Step 4: Configuring your Belkin Wireless Cable/DSL Router
(the Router) for connection to the Internet
5. Select “PPPoE” and click “Select”. The following screen will appear:
6. Enter your User Name. Your user name is the name that you use to log
on such as “[email protected]”
7. Enter your Password.
8. Type your password
one more time to
confirm your
password was
entered correctly.
9. Enter your Service
Name. The service
name is not always
required. If you are
not sure or you do
not have a service
name, then leave
this blank.
10. Once you have filled in all of this information, click “Enter”.
11. Pressing “Enter will take you to the MAC/Cloning Entry page”. Your
setup is complete. Go to the next section called Finishing PPPoE Setup.
45