Dc power cord, Belt clip holster – INFICON 2020ComboPRO Portable Photoionization Detector User Manual

Page 84

Advertising
background image

ISP-074-575-P1D

77

77

DC Power Cord

The 2020ComboPRO

can be connected to a car battery through the cigarette lighter

with the DC power cord. While the 2020ComboPRO is connected to the car battery,
the 2020ComboPRO battery is being charged.

NOTE: The 2020ComboPRO is not classified for use in hazardous locations with a DC

power cord.

To connect the 2020ComboPRO to a DC power supply:

1. Turn off the instrument by pressing the ON/OFF key for five seconds.

2. Connect the DC power cord (Part No.MX350004) to the

2020ComboPRO AC adapter jack on the rear of the instrument.

3. Connect the other end of the DC power cord to the cigarette lighter in

the car.

4. Turn the instrument on again by pressing the ON/OFF key.

If the vehicle is running, ensure the engine exhaust does not contaminate your
samples.

Belt Clip Holster

Use the belt clip holster (Part No. MX750011) to protect the instrument and to
mount the instrument to a belt.

Advertising