Brother DCP-7055 - Manual (Page 35)

Routine maintenance
29
A
Replacing the toner cartridge
A
Model Name: For the model name of toner
cartridges, see Replacing the consumable
items on page 28.
The Standard toner cartridge can print
approximately 700 pages (TN-2015) or 1,200
pages (TN-2215)
1
. The High Yield toner
cartridge (For DCP-7060D) can print
approximately 2,600 pages
1
. Actual page
count will vary depending on your average
type of document. When a toner cartridge is
running low, the LCD shows Toner Low.
The toner cartridge that comes supplied with
the machine is a Standard toner cartridge.
1 Approx. cartridge yield is declared in accordance
with ISO/IEC 19752.
IMPORTANT
Brother machines are designed to work
with toner of a particular specification and
will work to a level of optimum
performance when used with genuine
Brother Original toner cartridges. Brother
cannot guarantee this optimum
performance if toner or toner cartridges of
other specifications are used. Brother
does not therefore recommend the use of
cartridges other than genuine Brother
Original cartridges with this machine, or
the refilling of empty cartridges with toner
from other sources. If damage is caused
to the drum unit or other part of this
machine as a result of the use of toner or
toner cartridges other than genuine
Brother Original products due to the
incompatibility or lack of suitability of those
products with this machine, any repairs
required as a result may not be covered by
the warranty.
Note
• It is a good idea to keep a new toner
cartridge ready for use when you see the
Toner Low warning.
• To ensure high quality printing, we
recommend that you use only Brother
Original toner cartridges. When you want
to buy toner cartridges, please call your
Brother dealer.
• We recommend that you clean the
machine when you replace the toner
cartridge. See Cleaning the machine
on page 40.
• If you change the print density setting for
lighter or darker printing, the amount of
toner used will change.
• Wait to unpack the toner cartridge until
immediately before you put it into the
machine.