INFICON Cube CDGsci (REST Services) - Manual (Page 2)

2
tira88e1-a (2014-03) CDGsci.cp
Caution
Caution: data transmission errors
Any attempt to simultaneously operate the gauge via the RS232-ASCII
Serial Interface or Ethernet/Wireless interface together with the
diagnostic port may result in incorrect data and data transmission
errors.
Therefore, it is inadmissible to simultaneously operate the gauge via
the RS232-ASCII Serial Interface Ethernet/Wireless interface and the
diagnostic port.
This Communication Protocol contains instructions for operating INFICON Cube
using the REST service protocol
1) .
For safety information, specifications and operation instructions of the
vacuum gauges refer to the appropriate documents (
→  [1]).
The following description of REST service protocol is based on a dissertation of
Roy Fielding from 2000 that created the protocol using only the HTTP-word "Get"
(also to describe paramters).
We reserve the right to make technical changes without prior notice.
This document applies to INFICON Cube with Ethernet / Wireless interface only.
Part numbers of standard products are indicated below.
3 C S 1 - 3 1 1 - 2 3 0 0
Flange
1
3
E
DN 16 ISO-KF
DN 16 CF-R
8VCR female
3
6
9
C
F
0.1
1
10
100
1000
Measurement range
(F.S.)
The part number (PN) can be taken from the product nameplate.
If not indicated otherwise in the legends, the illustrations in this document corres-
pond to CDGsci gauges with the DN 16 ISO-KF vacuum connection.
We reserve the right to make technical changes without prior notice.
1)
REST service stands for Representational State Transfer service and is an ASCII based
data transfer protocol based on HTTP 1.1.
Source: http://en.wikipedia.org/wiki/Representational_state_transfer
General Information
Intended Use
REST service Protocol
Validity