IPitomy IPR20 Quick User Guide - Manual

Page 1 of 4
Copyright 2009 © IPitomy Communications, LLC
[email protected] | 941.306.2200
________________________________________________________________
IPr20 Quick Guide
The IPr20 is a 2 port FXS gateway that allow for integration of analog devices with your IP PBX.
!
IMPORTANT: As with any device that has a LAN and a WAN
interface you need to ensure that they are configured to different
subnets. If you are configuring an IPr20 on a 192.168.1.x network,
you will first need to connect your PC to the LAN port, access the
device by its default IP of 192.168.1.1, and change the LAN IP to a
different subnet (eg. 192.168.4.1)
Accessing the IPr20
1. Connect the WAN port of the IPr20 to your network
2. Log into the PBX
3. Navigate to Destinations=>Extensions
4. Click AutoDiscovery to scan your network
5. Search the page for the IPr20 MAC and note the IP address of the IPr20
Configuring the IPr20
Registering to the PBX
1. In your web browser, enter the IP address for the IPr20
2. Login to the IPr20
Username: admin
Password: voip
3. Navigate to SIP=>Server
4. Under Primary Server Settings set the *Address, Domain Name, and Outbound Proxy IP
to the IP address of the PBX
5. For *Port and Outbound Proxy Port enter 5060
6. Leave the rest of the settings at their defaults