Ring modulator, Slow attack, 99 insert effect parameter functions – Boss Audio Systems BR-900CD User Manual

Page 99

Advertising
background image

99

Insert Effect Parameter Functions

Section 3

With “COSM BASS AMP” or “COSM COMP BSS”

algorithms

Volume

0–100

Adjusts the volume and distortion of the amp.

Bass

GUITAR AMP: 0–100, BASS AMP:-100– +100

Adjusts the tone for the low frequency range.

Middle

GUITAR AMP: 0–100, BASS AMP:-100– +100

Adjusts the tone for the middle frequency range.

*

If you have selected “MATCH” or “VO DRV” as the type, the middle
control will have no effect.

Treble

GUITAR AMP: 0–100, BASS AMP: -100– +100

Adjusts the tone for the high frequency range.

Presence

0–100

This can be selected in the “COSM GTR AMP,” “COSM COMP
GTR,” or the “VO+GT.AMP” algorithm.
Adjusts the tone for the ultra high frequency range.

*

If you have selected “MATCH” or “VO DRV” as the type, raising
presence will cut the high range (the value will change from “0” to “-
100”).

Master

0–100

Adjusts the volume of the entire preamp.

Bright

OFF, ON

(with JC-120, CLEAN, CRUNCH, BLUES, BG LEAD, AC, AMG)
Turns the bright setting on/off.

OFF:

Bright is not used.

ON:

Bright is switched on to create a lighter and crisper tone.

Gain

LOW, MIDDLE, HIGH

Adjusts the distortion of the amp. Distortion will successively
increase for settings of “LOW,” “MIDDLE” and “HIGH.”

*

The sound of each Type is created on the basis that the Gain is set to
“MIDDLE.” So, normally set it to “MIDDLE.”

Ring Modulator

This creates a bell-like sound by ring-modulating the guitar sound
with the signal from the internal oscillator. The sound will be
unmusical and lack distinctive pitches.

On/Off

OFF, ON

This parameter turns the ring modulator effect on/off.

Frequency

0–100

This adjusts the frequency of the internal oscillator.

Fx Level

0–100

Adjusts the volume of the effect sound.

Dir Level

0–100

Adjust the volume of the direct sound.

Slow Attack

This produces a volume-swell effect (“violin-like” sound).

*

This effect can be used in the “COSM GTR AMP” algorithm when
the MODULATION “Type” parameter is set to “SLOW ATCK.”

On/Off

OFF, ON

This parameter turns the slow attack effect on/off.

RiseTme

10–2000 ms

This adjusts the time needed for the volume to reach its maximum
from the moment you begin picking.

Level

0–100

Adjust the volume of the slow attack sound.

AC

It produces the vintage sound of an early
transistor amp.

AMG

It produces the sound of a large double-stack
vacuum tube amp with ultra-lows and a crisp
edge.

Advertising