Caution, Warning, Aintenance and care – Bissell 3-IN-1 VAC 38B1 User Manual

Page 6: Roubleshooting

Advertising
background image

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

M

aintenance and care

T

roubleshooting

6

Cleaning the filter

The key to maximum performance is having clean

filters. Cleaning the filters after each use will help

your 3-in-1 vacuum operate at peak efficiency.

Use only BISSELL replacement filters in your

BISSELL 3-in-1 vacuum.

1. Turn Vacuum off (O).

2. Follow the steps on page 5 to remove

dirt container and main filter. To clean

the main filter, shake over a waste

container until debris is gone. Replace

the filter back into the dirt container.

Note: After heavy usage, you may clean

the filter by washing it gently by hand

in warm water and mild dish detergent.

Rinse thoroughly and make certain it

is completely dry before replacing it. If

filter is torn, replace it with a new filter.

3. Attach dirt container to vacuum by

depressing latch and serucely fitting

onto hand vacuum grip. Make sure dirt

container is correctly secured.

CAUTION:

Never operate your 3-in-1

vacuum without the filter

in place. Doing so may

damage the motor and void

the warranty.

WARNING:

To reduce the risk of injury from

moving parts and/or electrical

shock, turn Power Switch OFF and

disconnect polarized plug from

electrical outlet before performing

troubleshooting checks.

Vacuum cleaner won't run

Possible causes

Remedies

1. Power Cord not firmly plugged in.

1. Check electrical outlet.

2. Blown household fuse or breaker.

2. Check/replace fuse; reset breaker.

Vacuum cleaner won't vacuum effectively

Possible causes

Remedies

1. Filter clogged, wet or dirty.

1. Follow instructions for cleaning Filter.

2. Dirt Container clogged.

2. Follow instructions for emptying Dirt Container.

Dust blows out of the air vent

Possible causes

Remedies

1. Filter not properly secured to filter frame.

1. Follow instructions for Replacing Filter above.

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of

service. Contact us directly at 1-800-237-7691.

2

Advertising