Taky - operation, Display, Configuration – Kifco Taky User Manual
Page 6
Revised 5/3/2012
Taky - Operation
Display
Length
Length of tube pulled out from 0.00ft
to the full amount of tube. This
measure can exceed 100% of the
tube length do to stretching of the
MDPE.
Speed
Displays the speed of pullout or re-
traction in Ft/Hr.
State of Sensors
Normal - Both Sensors Displayed
Top Sensor - represents pinion sensor is functioning
Bottom Sensor represents Gearbox sensor functioning
Tube Layer
Number of layers of tube remaining on the drum –
represents no tube remaining on drum.
Battery Charge-
Fully Charged
Change Battery
Winding Status # Pullout
Retraction
Configuration
In configuration mode the following items can be adjusted:
Language
Units
Base (ST3-ST8)
PE Tube OD
PE Tube Length
To enter configuration mode utilize the following steps:
Press OK in startup Mode (serial number and Version displayed)
Press + and – simultaneously to enter Configuration Display
Press + or – to toggle through adjustments
2