Kifco Taky - Manual (Page 9)

Revised 5/3/2012
Taky Maintenance
Battery Replacement
Only use 1.5v alkaline batteries (AA). Rechargea-
ble batteries are not compatible with this sys-
tem.
Remove the 4 screws from the cover.
Replace the batteries.
Press the reset button to restart the circuit.
When replacing the battery the Taky will not
have to be completely reprogrammed; however,
you will need to reset the length.
Electrical Connections
Terminals VB+ and VB– are not used
(Figure 1)
Terminals S1+ and S1– must be con-
nected to the pinion sensor (Polarity
Same) (Figure 2)
Terminals S2+ and S2– must be con-
nected to gearbox tach shaft sensor
(Polarity Same)
Figure 1
Figure 2
5