Kinetik Blood Pressure BPM4TL - Manual (Page 17)

Storage and Maintenance
•
General Use
* Do not in any way twist the cuff.
* Do not press START/STOP button if the cuff is not wrapped around your upper arm.
* Do not drop the product and avoid any strong impacts.
•
Maintenance
* Use a piece of cloth with water or mild cleansing agent to wipe the device and dry it immediately with
a dry cloth.
* Do not use detergent or any strong chemicals to clean the device.
* Use only a dry cloth to wipe the cuff.
* Do not attempt to disassemble or change any parts of the monitor, including arm cuff, substitution of a
component different from that supplied might result in measurement error.
* This blood pressure monitor is calibrated at the time of manufacture. If the blood pressure monitor is used
according to the instruction, periodic recalibration is not required. If at any time you question the accuracy
of the measurement, please contact the retailer immediately.
•
Storage
* If the device is not to be used for a long time, please remove the batteries from the device (leaking of battery
acid can cause the device to malfunction).
* Always store the unit in the storage case after use.
* Do not place the device directly under sunlight, in high temperature, or in humid or dusty places.
* Do not store the device in extremely low (less than –4 ºF/–20 ºC) and high (more than 158 ºF/70 ºC)
temperature, nor in a place its humidity exceeds 90% R.H.
16