BT BF900 - Manual (Page 16)

Sending faxes
To load documents for faxing.
Load up to 30 pages at a time, face down, into
the document feeder. The first page is
automatically drawn a little way into the feeder.
Display shows SELECT LOC/COPY .
15
Using the BF900
Using the BF900
START
Normal dialling.
(You can dial up to 30 digits including P if you
need to include a pause)
• Load the document.
• Set the
TYPE ORG , RESOLUTION and PHOTO
settings if necessary. (See page 27.)
• Dial the fax number you want on the BF900
keypad.
• Press the START button. The document is
scanned. Display shows MEMORY TX.
SCANNING MXX . You can now retrieve your
original document.
• The fax number is dialled. Display shows
CALLING . When the call is answered, the
display shows FAX CONNECTION.
TRANSMITTING .
• While the fax is being transmitted, the
display alternates between the number of
pages being sent and the fax number you
have dialled.
• After the last page has been completed, if the
call is successful display shows TX=OK .
Do not try to send or copy documents which are:
• still wet with ink or correcting f luid
• very thick or very thin (for best results, paper should
be 80gsm)
• stapled or clipped together
• torn, folded, crumpled or with punched holes
• on carbon paper or glossy paper.
When adjusting the settings, if you do not touch
any buttons for more than 1 minute, your BF900
will automatically return to standby.
In the display, RX=receive, TX=send.