BT 900 - Manual (Page 14)

11
To store a quickdial number
Once you have selected either your ‘Personal’ or
‘Shared’
QUICKDIAL store:
• Press and release the QUICKDIAL button
• LCD shows 1 if no number stored or 1
followed by the number stored in the
memory.
• Press the ➔ button to scroll through the
memory locations
• When the required memory location is
displayed press and hold the QUICKDIAL
button for at least 2 seconds or until a beep is
heard.
• Enter the phone number you want.
• The display shows the location and the phone
number.
• Press the ✔ button to store the number. You
hear a confirmation beep and the display
shows
STORED
Using the quickdial
memory
Shared and personal quickdials
You can store up to 20 numbers on your
Synergy 900.
Shared telephone numbers
10 numbers can be stored in your shared memory.
These numbers can be quick dialled by any
Synergy handset registered with the base station.
Personal telephone numbers
A further 10 numbers can be stored in your
personal memory. These numbers can only be
used to quickdial from the handset they are
stored in.
To select shared or personal quickdial numbers
Your Synergy is set to SHARED quickdials. You
can switch between SHARED and PERSONAL
quickdials.
• Press and hold the QUICKDIAL button for at
least 2 seconds.
• Handset beeps and LCD shows
SHARED or
PERSONAL depending on the current setting.
• Press ➔ to switch between the 2 options.
• When required option is displayed on LCD
press ✔ to confirm.
• Handset LCD reverts to HSET 1
Quickdial
0-9
You may find it useful to keep a note of the
location number (
0-9 ) you set for quickdial
numbers. Use the directory label on the back of
the handset.
1
2
3
4
5
6
7
8
9
0
No.
PULL
Quickdial