BT 900 - Manual (Page 17)

14
If more than one handset is registered to the
base it can be useful to select different melodies
for each handset.
To adjust the ringer volume in the base
station
You can switch between HI , LOW and OFF .
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ➔ button. Display shows BASE.
• Press the ✔ button. Display shows SECURITY
PIN.
• Press the ➔ button until the display shows
RING VOL.
• Press the ✔ button. Display shows and plays
the current setting HI (or LOW, OFF).
• Press the ➔ to change the setting. Display
shows the next option and the ringer sounds.
• Press the ✔ button. A beep confirms that the
change has been made.
To adjust the base station melody
You can select from four different ringer
melodies.
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows
HANDSET.
• Press the ➔ button. Display shows BASE.
• Press the ✔ button. Display shows
SECURITY
PIN.
• Press the ➔ button until the display shows
MELODIES.
• Press the ✔ button. Display shows the
current setting A (or B, C, D). The displayed
setting is played.
• Press the ➔ button to change the setting.
Display shows the next melody option.
The melody is played.
• Press the ✔ button when you want to select a
melody. A beep confirms that the change has
been made.
• Press the ➔ button until the display shows
MELODIES.
• Press the ✔ button. Display shows the
current setting
A (or B, C, D, E, F). The
displayed setting is played.
• Press the ➔ to change the setting. Display
shows the next melody option. The melody is
played.
• Press the ✔ button when you want to select
a melody. A beep confirms that the change
has been made.