KV2 Audio ESP4000 - Manual (Page 3)

How to use this manual
As you read this manual, you’ll find figures and
diagrams to help you understand and visualise
what you’re reading. You’ll also find numerous
icons that serve as cues to flag important informa-
tion or warn you against improper or potentially
harmful activities.
Icons Used Include
“NOTE” identifies an
important or useful piece
of information relating to
the topic under discussion.
“TIP” offers a helpful
tip relevant to the topic
at hand.
“CAUTION” gives notice
that an action can have
serious consequences and
could cause harm to
equipment or personnel,
delays, or other problems.
NOTE
!
TIP
CAUTION
Page | 3
consult an electrician for replacement of the
obsolete outlet.
11. Protect the power cord from being walked
on or pinched, particularly at plugs, conven-
ience receptacles and the point where they exit
from the amplifier. The AC mains plug or appli-
ance coupler shall remain readily accessible for
operation.
12. Only use accessories specified by KV2 Audio.
13. The unit is intended for use in a 19” rack.
Follow the mounting instructions. When a rack on
wheels is use, use caution when moving the loaded
rack to avoid injury from tipping over.
14. Install the product only with both front and
rear supports.
CAUTION: Installation should only be
done by experienced professionals.
15. Unplug this amplifier during lightning
storms or when unused for long periods of time.
16. Do not connect a ESP4000’s output in parallel
or series with any other ESP4000’s output. Do not
connect the ESP4000 output to any other voltage
source, such as a battery, mains source or power
supply, regardless of whether the ESP4000 is
turned on or off.
17. Do not run the output of any ESP4000 back
into another channels input.
18. Refer all servicing to qualified service per-
sonnel. Servicing is required when the amplifier
has been damaged in any way, such as when
the power-supply cord or plug has been dam-
aged; liquid has been spilled or objects have
fallen into the amplifier; rain or moisture has
entered the amplifier; the amplifier has been
dropped; or when for undetermined reasons
the amplifier does not operate normally.
19. Do not remove top or bottom covers.
Removal of the cover will expose hazardous
voltages. There are no user serviceable parts
inside and removable may void the warranty.
20. An experienced user shall always supervise
this professional audio equipment.
Important Safety Instructions
1 Read all product instructions.
2. Keep printed instructions, do not throw away.
3. Respect and review all warnings.
4. Follow all instructions.
5. Do not use this unit near water, in unprotected
out door areas or in rain or wet conditions.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with KV2 Audio’s
recommended installation instructions.
9. Do not install near any heat sources such as heat
radiators, heat registers, stoves or other apparatus
that produce heat.
10. Do not defeat the safety purpose of the ground-
ing type plug. A grounding type plug has two
blades and a third grounding connector. The third
connector is provided for your safety. If the provided
plug does not fit into your outlet,
CAUTION
!