KV2 Audio ESR215 - Manual (Page 17)

Drawing
ESR215
Drawing
17
The three-way, mid / high loudspea-
ker system shall incorporate two
15-inch mid-bass (MB) transducer a
8-inch mid range (MR) speaker and
a 1.4-inch exit compression driver
high frequency (HF) transducer. The
LF drivers shall be mounted above
and below mid / hi horn tuned for
optimum mid-bass response and
dispersion. The HF and MR transdu-
cers shall be loaded on a integrated,
constant directivity, wide dispersion
mid/high horn assembly. The system has a nominal coverage
pattern of 110° (horizontal) x 40°
(vertical). The loudspeaker enclosu-
re shall have a rectangular shape
and shall incorporate, two top
handles. Enclosure incorporates
M10 suspension points, three M10
suspension points on the top, one
in the handles, three M10 on the
bottom and one M10 suspension
point on the back. The speaker
cabinet shall be finished with an
ultra wear resistant black polymer
coating and fitted with a weather
resistant perforated steel grill. The
system shall receive power from a
separate ESR3000 Amplifer. ESR3000 Amplifier - Controller
module consisting of separate
power amplifiers for high, midran-
ge and midbass transducers as
well as signal processing including
electronic band pass crossover
filters, phase alignment, time
correction, equalization and
speaker protection. The speaker
system shall connect to the
Amplifier/Controller Module via
proprietary cables terminated in
Amphenol AP-6 connectors. The
three-way mid / high loudspeaker
system shall be the KV2 Audio
ESR215.
ESR215 Architects and Engineer’s
Specifications