Lenze CS 9000 DVI Mounting Instructions - Manual (Page 28)

Installation
Mounting steps
Removing the mounting frame
4
l
28 MA_CSx0xx DE/EN/FR/ES/IT 2.0
4.2 Mounting steps
4.2.1 Removing the mounting frame

ƒ
0
1
„ 0
‚
0
2
0V U 0V U
CS50xx−004
How to proceed:
1. Lay the device flat, with the mounting frame
0 upwards, on a work
surface cushioned with a blanket.
– The work surface must be stable, sufficiently large, and free of any
objects. The touchscreen will be damaged when being laid on objects as
for instance screws.
2. Remove screws from the mounting frame.
3. Open the mounting frame
0 at the top carefully until it locks and pull the
earthing cable 1.
4. Unlatch the mounting frame 0 from the attachment 2 and remove it.
Now you can mount the mounting frame to a support arm (
¶ 29) or to a wall.
(
¶ 31)