Lenze CS 9000 DVI Mounting Instructions - Manual (Page 33)

Installation
Electrical installation
4
l
33 MA_CSx0xx DE/EN/FR/ES/IT 2.0
4.3 Electrical installation
Terminal diagram supply
L1
N
PE
L1 N
+
0V +24
+
~ =
+
0 VPE +24 V
+
0
1
2
F
S
CS50x0−021
0 Mounting frame
1 Screen
2 Power supply unit
)
Note!
Observe the max. permissible input voltage.
Professionally fuse the device on the input side against voltage
variations and voltage peaks.
Connecting the supply and peripheral devices
For connecting the supply and the peripherals, the screen must be fitted into the
mounting frame and hinged down.
(
Stop!
Screen may fall down
If the screen is not screwed together with the mounting frame it
may fall down.
Possible consequences:
ƒ The screen is damaged.
ƒ Injuries by the falling device.
Protective measures:
ƒ Secure screen against falling down.