Lenze PLC Designer Migration PLC Designer (R2-x)-PLC Designer (R3-x) - Manual (Page 18)

Update of a project from V2.x to V3.x
Components of the V2.x example project
18
Lenze · PLC Designer | Migration of V2.x projects · 1.2 EN - 02/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Update of a project from V2.x to V3.x
This chapter describes how to change a PLC program created in the »PLC Designer« V2.x in order to
be able to import it into the »PLC Designer« V3.x.
7.1 Components of the V2.x example project
Control configuration
The control configuration of the example project is composed as follows:
[7-1] Example: Control configuration in the »PLC Designer« V2.x
Contains Motion and Logic devices triggered via CAN bus by the Controller.
Target system
Set target system: L-force Motion x700 V7