Lenze 8400 StateLine - Manual (Page 706)

15 Parameter reference
15.2 Parameter list | C00574
706
Lenze · 8400 StateLine · Reference manual · DMS 12.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00574
C00579
C00580
Parameter | Name:
C00574 | Resp. to brake resist. overtemp.
Data type: UNSIGNED_8
Index: 24001
d
= 5DC1
h
Response which is triggered if the threshold set in C00572 for monitoring brake resistor utilisation is reached.
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00579 | Resp. to max. speed/output freq. reached
Data type: UNSIGNED_8
Index: 23996
d
= 5DBC
h
Response when the max. speed limit ( C00909 ) or output frequency limit ( C00910 ) has been reached.
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00580 | Resp. to operating system error
Data type: UNSIGNED_8
Index: 23995
d
= 5DBB
h
From version 11.00.00
Response if the required computing time of the application exceeds the available computing time.
Selection list
0 No Reaction
1 Fault
5 Warning
Subcodes Lenze setting Info
C00580/1 0: No Reaction Resp. to runtime exceedance
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1