Lenze Backup + Restore__Backup+Restore (PC-based) - Manual (Page 31)

1.6 EN - 01/2011
L
31
Control technology | IPC Backup & Restore
Operation
Backup & Restore with a USB stick
4.2.3 Update
This function serves to prepare a USB stick for a software update of an industrial PC by
transferring the required software update to the USB stick.
 The stored software update from the USB stick can then be installed on the CF card of
the industrial PC.
 For the control of the update process in the industrial PC the control file is additionally
written to the USB stick.

Note!
• The storage medium selected in »IPC Backup & Restore« must correspond to
the storage medium physically available!
• The selection of faulty configuration data may cause maloperation when the
system is started! A software update only works perfectly with the software
provided by Lenze.
• The Lenze software and operating system can only be updated with a USB
stick! The USB stick must be formatted as FAT 16 file system!