Lenze Card File Handler - Manual (Page 25)

L
1.1 EN 25
Card File Handler
Operation
Editing drive sets
What do you want to do?
 Renaming a drive set
 Adding/removing a DDS binary file
(E 26)
 Adding/removing a GDC parameter set file
(E 27)

Adding/removing user data
(E 28)
 Activating the option "Execute reset (origin) at download"
(E 29)

Adding a comment to a drive set
(E 29)
 Deleting a drive set
(E 30)

Loading a drive set from another archive
(E 30)
3.3.1 Renaming a drive set
The hexadecimal numbers "0" ... "F" are used to designate the 16 drive sets of a card.
C If you assign a DDS binary file to a drive set or import drive sets from a SmartMedia card
the program name will be added to the designation.
Example:
3 - program name
S
How to rename a drive set:
1. Select the drive set to be renamed from the archive tree.
2. Click the name of the drive set once again in the archive tree or select the command
FileDrive setRename drive set.
3. Enter the new name in the Rename drive set dialog box and confirm your entry with
OK.
• The name must not include more than 215 characters.
• The following letters, digits and special characters are permissible: A..Z or a..z,
0..9 and $ & # ß % ’ ( ) - @ ^ !
• The name will be added to the hexadecimal number separated by a hyphen.
Note!
If you rename a drive set the corresponding sub-folder on the file level will be
renamed accordingly.
The hexadecimal numbers "0" ... "F" are always indicated and cannot be changed.
Show/Hide Bookmarks