Lenze Card File Handler - Manual (Page 26)

Card File Handler
Operation
Editing drive sets
26 1.1 EN
L
3.3.2 Adding/removing a DDS binary file
Adding a DDS binary file
This function is used to load an IEC 61131 program created with the Drive PLC Developer
Studio to the selected drive set.
C For the import into the selected target system, the IEC 61131 program must have been
properly compiled as a binary file (*.bin).
X
Tip!
Use the command ProjectBuild to create a DDS binary file in the Drive PLC
Developer Studio.
If you go to ProjectOptions and activate the option Build GDC device description
in the Drive PLC Developer Studio the DDS binary file and a GDC device description
file (*.pdb) will be generated during compiling.
GDC device description files are required if you want to create GDC parameter set
files (*.gdc) with Global Drive Control.
 Adding/removing a GDC parameter set file
(E 27)
S
How to add a DDS binary file to a drive set:
1. Select the drive set to which you want to add the DDS binary file from the archive
tree.
2. Go to the Dialog area and click the icon to the right of the DDS binary file text
field.
3. Go to the Open DDS binary file dialog box, select the corresponding DDS binary file
(*.bin) and click Open.
Removing a DDS binary file
Note!
If you remove a DDS binary file from a drive set all other data (GDC parameter
set file, application data) will be removed from the drive set as well!
Show/Hide Bookmarks