Loadstar Sensors SC-1200 - Manual

SC-1200 Quick Start Guide
© 2011 Loadstar Sensors Inc 1
SC SC SC SC----1200 Quick Start Guide 1200 Quick Start Guide 1200 Quick Start Guide 1200 Quick Start Guide
Install LoadVUE first. This will install the drivers needed.
(You can also download the drivers from
http://www.ftdichip.com/Drivers/CDM/CDM20814_Setup.exe
Simply download the .exe file and double-click to run it). This location might
have changed since this document was created. If you have problems
downloading, please check
http://www.ftdichip.com/Drivers/VCP.htm
Plug all the load cells to SC-1200’s sensor ports. (The picture shows 9).
Plug in the power supply module to DC-IN and power up. Verify SC-1200’s
Green LEDs are on.