Loadstar Sensors LV-100 - Manual (Page 3)

LoadVUE User Guide • 2
Operation
To run LoadVUE, click All Programs...LoadVUE or double-click on the Desktop shortcut for LoadVUE.
LoadVUE will scan all installed COM ports for attached sensors.
Note: Loadstar Sensors Drivers should first be installed for the sensors to be detected.
The LoadVUE main window is now shown.
Click Tare to zero the load on the sensors.
Click Start to start reading the sensors. The sensors will be polled as fast as possible but the data is displayed at a more
human-readable rate.
The current unit system is displayed above the load reading. Click on the units to change the units. You can also right-click on
the load to change the units.
Loadstar Sensors, Inc. • www.loadstarsensors.com