Loadstar Sensors LV-100 User Manual
Page 7
Advertising
LoadVUE User Guide • 6
Type
O0W1
and hit
<Enter>
. The sensor will respond with the current load on the sensor in millipounds. In the figure below
the load is 2.853 pounds.
Type
CT0<Enter>
to tare the sensor. This will zero the load (all further readings will subtract the load sensed at this point.)
Type
O0W0<Enter>
to output the load continuously. Hitting
<Enter>
at any time will stop outputting the readings.
Loadstar Sensors, Inc. •
www.loadstarsensors.com
Advertising