Operation – Loadstar Sensors nCounter User Manual
Page 2
Advertising
nCounter User Guide • 2
Operation
You can watch nCounter in operation at
To run nCounter, click
All Programs...nCounter
or double-click on the Desktop shortcut for nCounter.
nCounter will scan all installed COM ports for attached sensor.
Note: Loadstar Sensors Drivers should first be installed for the sensor to be detected.
The nCounter main window is now shown.
Click
Add/Edit…
to show the Parts List window.
Click
New Part…
to create a new part. The Part Details window is shown.
Loadstar Sensors, Inc. •
www.loadstarsensors.com
Advertising