Longevity MIGWELD 200S - Manual (Page 12)

- 12 -
OPERATION AND CONTROLS
Diagram of panel
1. QC/STICK/MIG Indicator
Light indicators which demonstrate which welding process is selected and if the duty cycle has been
reached.
2. MIG/ STICK Selction Knob
Allows easy selection of the welding process desired.
3. Wire Feed/ Spool Gun Knob
Easily switches between the wire feed and spool gun functions of the MigWeld 200S
4. Voltage/ Arc Force Knob
When the unit is in MIG mode, this knob adjusts the welding voltage. If the unit is in STICK mode,
the knob adjusts the amount of arc force.
5. Wire Speed / Stick Amps
Allows the user to control the wire speed function when in MIG mode or to adjust the amperage
when in STICK mode
6. Wave Form
Controls arc characteristics while in MIG mode only. Lower wave form settings make the arc
softer with less weld spatter. Higher wave form settings give a stronger driving arc which can
increase weld penetration.