Health & safety – Marshalltown PC3000T Tectonic Plate Compactor Owner's Manual User Manual
Page 11
HEALTH &
SAFETY
11
PRACTICE SAFE MAINTENANCE
•
Observe the maintenance, inspection and adjustments and intervals specified in the operat-
ing instructions, as well as the information for part replacement.
•
Maintenance work must be undertaken only by qualified and authorized persons.
•
Maintenance and repairs must only be undertaken with the drive stationary.
•
Only carry out maintenance and repairs when the machine is parked on a firm and even
surface and is secured to prevent it from moving.
•
Spare parts must comply with the technical requirements of the manufacturer. Therefore
only use original spare parts.
•
After completing all work (with the system still pressureless), inspect all connections and
bolted connections for leaks.
•
Inspect all hoses and bolted connections for leaks at regular intervals (depending on time
used), even when no safety-related faults are visible.
•
Inspect the electrical equipment of the machine at regular intervals. Faults such as loose
connections, worn or scorched cables must be remedied immediately.
USE COMMON SENSE WHEN HANDLING FUELS
• Transport and handle fuel only when contained in approved safety containers.
• Do not smoke when refueling the engine or during any other fuel handling operation.
• If fuel is spilled during refueling, wipe it off from the engine immediately and discard the rag
in a safe place.
• Do not operate the equipment if fuel or oil leaks exist-repair immediately.
• Never operate this equipment in an explosive atmosphere.
•
Starting fluid (ether) is highly flammable, do not use or an explosion or fire may result.
SAFETY USE
These machines are designed to carry out the function of compacting material of the cohesive, bituminous
and granular varieties.
If used correctly they will provide an effective and safe means of compaction and meet the appropriate
performance standards.
It is essential that the driver/operator of the machine is adequately trained in its safe operation, be authorized
to drive it, and have sufficient knowledge of the machine to ensure that it is in full working order before being
put to use.