Boss Audio Systems RC-20XL - Manual (Page 21)

21
Using the RC-20XL for practicing—Phrase Trainer
* If an effect such as reverb has been applied to the sounds localized at the center, it may not be
possible to erase the sound completely.
3. If you set the tempo before recording, press the TAP TEMPO button or the right
pedal several times in time with the tempo of the phrase you wish to record.
4. If you want recording to begin at the moment the performance starts, turn
the AUTO START button on (indicator lit).
5. Press the left pedal to start recording.
* If the internal memory is used up, recording or overdubbing may stop before you are
finished. If this occurs, erase unnecessary phrases (p. 31), and try the operation again.
6. Press the right pedal to stop recording.
When recording ends, the tempo of the phrase will be assigned automatically.
* The automatic tempo setting is calculated with a time signature of 4/4. If you are recording
a phrase whose time signature is different, you must set the time signature before recording
(p.34).
7. Press the WRITE button, getting the indicator to start flashing. To save the
data in the same phrase track, press the WRITE button once again.
If you wish to save the data in a different phrase track, press the WRITE button (so its
indicator is flashing), use the PHRASE SELECT knob to select the desired save
destination, and then press the WRITE button once again.
* For details on saving, refer to “Saving a phrase” (p. 29).
Practicing at a different tempo
To change the tempo while the phrase is playing, press the TAP TEMPO button
several times at the desired interval.
The tempo of the phrase will change temporarily.
* For details on changing the tempo, refer to “Setting the tempo” (p. 33).
* It is not possible to adjust the tempo beyond a certain limit.
If you wish to keep the modified tempo, save the phrase (p. 29).
RC-20XL_e.book 21 ページ ２００４年４月２８日 水曜日 午後４時１２分