When connecting two fs-5u – Boss Audio Systems RC-20XL User Manual

Page 25

Advertising
background image

25

Playing back in various ways

• When you switch to a phrase set to One-Shot Playback, the phrase is played

to the end, and then playback stops.

• If you use Phrase Shift during One-Shot Playback, the phrase is played to the

end, then the unit switches to the next phrase.

The unit may not switch to the next phrase if you carry out Phrase Shift while the
end of the phrase is approaching. Use Phrase Shift while there is still ample time
to carry it out.

After carrying out the switch operation, you cannot change the tempo or switch to
Reverse Playback until the phrases are switched.

5.

Press the right pedal to stop playback.

When you start playback again, the phrase selected with the PHRASE SELECT knob
will play.

You can also use Phrase Shift with the PHRASE SELECT knob.

If, while a phrase is playing back, you turn the PHRASE SELECT knob to select
the phrase track that will be played next, the next phrase will begin at the moment
that the currently playing phrase returns to the loop start.

When connecting two FS-5U

You can connect two FS-5U pedals using the special connection cable (the optional
Roland PCS-31).

• Pressing the FS-5U to which the plug with the white stripe has been

connected switches phrase tracks as follows: 1

2

3...11

1... (switches to

the next higher track number).

Pressing the FS-5U to which the plug with the red stripe has been connected

switches phrase tracks as follows: 11

10

9...1

11... (switches to the

previous lower track number).

White

INC

Red

DEC

PCS-31

Set the polarity switch
as shown in the figure.

Number up

Number down

RC-20XL_e.book 25 ページ 2004年4月28日 水曜日 午後4時12分

Advertising