Mayline Convert Rule to Above Board Attachmen - Manual (Page 2)

INSTRUCTIONS FOR RESTRINGING
MAYLINE STRAIGHTEDGE
Ring
Terminal (2)
NOTE: Please count and inspect all pieces before disposing of any carton or packing materials.
COMPONENTS:
REF.# QTY. DESCRIPTION PART No.
1 CALL~~ Plastic Cable C1
2 2 Ring Terminal Q6
5. Crimp ring terminals onto the upper ends of cables A & B. (See Fig. 3)
6. Replace pulley housing / brake assembly. (See front page for Fig. 2)
1. Total cable length required: (3) x (length of straightedge) + 8 feet.
2. Cut total cable length into two equal lengths.
3. Feed one end of Cable 1B through slot in straightedge cap until
approximately 6 inches extends through opposite end. (See Fig. 3)
4. Tape end of Cable 1A to Cable 1B and pull through until 6 inches of
Cable 1A is through opposite end. (See Fig. 3) Remove tape
Cable (1B)
When ordering components, specific color and/or size information may be required.
Contact a Mayline Customer Service Representative. 1-800-822-8037
Fig. 3
Tape Cable (1B)
Cable (1A)
Ring
Terminal (2)
(2)