Memmert AtmoCONTROL - Manual (Page 15)

D24042 | Date 09/2014 15
AtmoCONTROL
4.1.3 Setting parameters
If a parameter icon is selected (clicked) on an editor thread, it is
displayed with an orange frame. The adjustable values – in the
example on the right, the ramp name, the duration of the ramp
and the setpoint temperature – have a grey background.
To adjust values, click successively on the corresponding fields – in
the example on the right, the setpoint temperature. The value is
highlighted in colour and can be changed by keyboard entry or
clicking on the arrow icons.
The adjustment range depends on the appliance for which the
programme is created.
The main parameters have additional adjustment options, which
can be displayed by clicking on the fold down icon (Fig. 6, No. 1).
Here, the adjustable values – in the example below, the tolerance
band and the setpoint dependency (SPWT) – also have a grey
background (2) and can be adjusted after being clicked on (3).
0,1 K/min
Tolerance band
0,1 K/min
Tolerance band
1
2
3
Fig. 6 Further adjustment options fold down after clicking on the arrow icon on the right
edge of the window (1)
Fig. 6 Fig. 6 Further adjustment options fold down after clicking on the arrow icon on the right Further adjustment options fold down after clicking on the arrow icon on the right
- -
h
: - -
m
- - - .-
°C
21 .0
°C
Ramp 01
37 .0
°C
1 1
h
: 3 0
m
21 .0
°C