Boss Audio Systems Boss Loop Station RC-300 - Manual (Page 20)

20
Here you can make settings that apply to the entire phrase memory.
First press the [MEMORY EDIT] button.
For details, refer to “Basic Editing Procedure” (p. 9).
Parameter Value Explanation
Memory:Name
INIT MEMORY
Naming Phrase Memories (Memory Names)
You can give names to phrase memories (memory names) using up to 16 characters.
To access the memory name screen, press the [MEMORY EDIT] button and then press the [
] button.
MEMO
Normally, the [ ]/[ ] buttons are used to select parameters, but in the memory name screen they are used
to move the cursor. When the cursor is located at the far right, pressing the [ ] button once again will take
you to the next parameter.
Use the [ ]/[ ] buttons to move the cursor to the character that you want to edit, and turn the [MEMORY/
VALUE] knob to edit the character. You can also use the following buttons.
Button Function
CAPS (RHYTHM EDIT)
Alternately switches the letter at the cursor position between uppercase and
lowercase.
INS (RHYTHM ON/OFF) Inserts a blank space at the cursor position.
DEL (RHYTHM TAP TEMPO)
Deletes the character at the cursor position and shifts all characters after it to the
left.
Memory:Level
100
Adjusting the Phrase Memory Volume (Memory Level)
You can adjust the phrase memory volume.
This is convenient when you want to adjust the output volume for both the MAIN OUTPUT and SUB OUTPUT jacks
simultaneously.
Normally, this is set to the center with a level of 100.
0–200 Volume of the phrase memory
Memory:Input Out
MAIN+SUB
Setting the Output Jacks for the Sounds Being Input
(Input Output Select)
This selects the output jacks to be used for the output of sounds arriving at the INPUT jacks (AUX, INST, MIC).
If desired, you can also make this setting apply to all phrase memories. g “Using the Same Output Jacks for All
Phrase Memories (Input/Track 1, 2, 3/Rhythm Output)” (p. 33)
MAIN The sound is output from the MAIN OUTPUT and PHONES jacks.
SUB
The sound is output from the SUB OUTPUT jacks. The sound is not output from the MAIN
OUTPUT and PHONES jacks.
MAIN+SUB The sound is output from the MAIN and SUB OUTPUT jacks and the PHONES jack.
MUTE
The input sound will not be output.
* Tracks will be recorded.
Phrase Memory Settings