System settings (settings for the entire rc-300), Adjusting the display’s brightness (lcd contrast), Specifying the operation of the [loop fx] pedal – Boss Audio Systems Boss Loop Station RC-300 User Manual

Page 32: Setting the knob/slider functions (knob mode), Sys:lcd contrast 8, Sys:loop fx pdl fx on/off + asgn, Sys:knob mode immediate

Advertising
background image

32

System Settings (Settings for the Entire RC-300)

Settings that are shared by the entire RC-300, such as those for the contrast of display and

the auto off function are called “system settings.”

First press the [SYSTEM] button.
For details, refer to “Basic Editing Procedure” (p. 9).

Parameter

Value

Explanation

Sys:LCD Contrast

8

Adjusting the Display’s Brightness (LCD Contrast)

In some locations where the RC-300 is set up, you may find that the display is difficult to read.
If this occurs, adjust the display’s contrast.

1–16

Adjusts the contrast of the display in a range from 1 (lightest) to 16 (darkest).

Sys:LOOP FX Pdl

FX ON/OFF + ASGN

Specifying the Operation of the [LOOP FX] Pedal

Here you can specify the operation of the [LOOP FX] pedal.

FX ON/OFF + ASGN

Controls LOOP FX on/off and the Assign function (p. 23).

ASSIGN

Controls only the Assign function (p. 23).

Sys:MemoryExtent

1 => 99

Limiting the Phrase Memories That can be Switched

(Phrase Memory Extent)

By setting the upper and lower limits for the phrase memories the RC-300 can switch to, you’ll more easily be able to

select the phrase memories you need.
Press [ ] /[ ] button to move the cursor, and turn the [MEMORY/VALUE] knob to set the upper and lower limits of

the range.

1–99

Upper and lower limits for phrase memories the RC-300 can switch to

Sys:Knob Mode

IMMEDIATE

Setting the Knob/Slider Functions (Knob Mode)

This sets the way the values of settings are changed when the knobs/sliders are operated.
The Knob Mode setting works with respect to the RHYTHM [LEVEL] knob and TRACK [1]–[3] sliders.

Value

Value when the phrase memory is loaded Value when a knob or slider is operated

IMMEDIATE

Value specified by the phrase memory

Value will change immediately

MEMORY SETTING

Value specified by the phrase memory

Value will start changing when the knob or

slider is moved to a position matching the

value in the phrase memory

KNOB POSITION

Value of the knob or slider position

Value will change immediately

Advertising