MMF POS Advantage Series Cash Drawer (C1 Body Size) 18.8 x 20 User Manual
Page 6

Advantage User Manual
Last revised: 9/1/2012
5
USB with Serial Emulation Interface
The MMF USB with Serial Emulation interface has been designed for customers
with Legacy software whose computers do not have an actual COM port
available. Serial Emulation will change the USB to a Serial (COM) Device in by
creating a virtual COM port in the host computer once installed, which will be
used by the cash drawer interface.
USB 2.0 & 1.1 compliant
Plug & Play and hot swappable capability
System Requirements: PC - Pentium 233 and Higher, 1 USB 2.0 port, WIN
98SE/ME/2000/XP
6 ft. USB 2.0 A-B cable
Follow the procedures detailed in the USB with Emulation User Manual which came with the cash drawer or
could be downloaded fro
PoweredUSB Interface
The MMF PoweredUSB Interface feature offers the end user the capability to have only one
cable for both signal and power, there is no need for an external power supply. This solution
will increase your connectivity potential, accessibility, and cable management issues.
12V PoweredUSB Rated Cable (12VDC / .8 Amp)
Plug & Play and hot swappable capability
System Requirements: PC - Pentium 233 and Higher, 1 USB 2.0 port, WIN
98SE/ME/2000/XP
Follow the procedures detailed in the PoweredUSB User Manual
which came with the cash drawer or
could be downloaded fro
Multi-Serial Programmable Interface
The Multi-Serial Interface has been designed to open the Advantage Series electronically through the serial
port of the computer.
Connect the power supply by plugging the small plug tip to the interface recepticle in
the back of the cash drawer. Plug the power adapter end into a 120 Volt AC Recepticle.
Uncoil the corresponding interface cable and securely fasten to COM1 or COM2 of the
computer. Refer to the chart below for the optional cables available for this interface.
OPTIONAL SERIAL CABLES AND ADAPTERS
P/N: 2261 99SD9F06 00 : STD. CABLE DB-9 FEMALE TO DB-9 MALE
P/N: 2261 99ND9F06 00 : DAISY-CHAIN 2 CASH DRAWERS DB-9 F TO DB-9 M AND DB-9 M.
P/N: 2261 99ND9FA6 0 : DAISY-CHAIN 2 OR MORE CASH DRAWERS OR TO DAISY-CHAIN A SERIAL
PERIPHERAL SUCH AS A PRINTER OR OTHER DEVICE. DB-9 F TO DB-9 M AND DB-9 M.
P/N: 2261 99DB9250 00 : SERIAL ADAPTOR TO CONVERT A DB-9 MALE TO A DB-25 FEMALE
- Advantage Series Cash Drawer (C2 Body Size) 18.8 x 21 Advantage Series Manual Drawer (B1 Body Size) 18 x 16.7 Advantage Series Manual Drawer (C1 Body Size) 18.8 x 20 Advantage Series Cash Drawer (A1 Body Size) 17.4 x 18.7 Advantage Series ADV-INABOX Advantage Series Cash Drawer (B1 Body Size) 18 x 16.7