MTS FlexTest Models 200 - Manual (Page 331)

Model 793 Multibox Systems
MTS FlexTest® Models 40/60/100/200 Controller Hardware Model 793 Multibox Systems 331
Appendix D
Model 793 Multibox Systems
This section provides a general overview on how to set up Model 793 Multibox
Systems.
Perform the following procedures in the order shown:
1. “Connect the Multibox System” on page 332.
2. “Use the CMT to Register Multiple Controllers” on page 333.
3. “Use the CMT to Configure the Controller” on page 335.
4. “Create an .hwi File for Each Box” on page 337.
5. “Use the Station Builder Application to Create a Multibox Configuration”
on page 338.
Important The procedures in this section should only be performed by MTS
personnel.