MTS Advantage Wedge Action Grips - Manual (Page 23)

Manual Name Installation 23
Installation
This section describes how to install the MTS Advantage Wedge Grips in a load
frame.
About Grip Installation
Grip Installation is inherently dangerous because it occurs within the crush
zone of the force train. During installation (electrical or servohydraulic)
power is applied to the system because crosshead or actuator movement is
required.
Serious injury and damage to the equipment can occur.
Take every precaution to avoid unexpected crosshead or actuator movement.
Installation Components
WARNING
Locking
Collar
Mounting
Pin
Mounting
Dowel
Load Frame
Mounting
Adapter