MTS Fundamental Pneumatic Grip Controller - Manual (Page 5)

Control Panel Identification
MTS Fundamental™ Pneumatic Grip Controller Product Manual 5
Control Panel Identification
Front Panel
1
2
3
5
4
I TEM C ONTROL D ESCRIPTION
1 Power/equipment indicator A continuously lit indicator indicates the pwoer is
OK; If the indicator keeps flashing, check the AC
power adapter.
2 Output air pressure (indicating
gage) MTS Fundamental Pneumatic Grips can withstand a
maximum pressure of 0.7 MPa (100 psi).
3 Pressure control (knob) Use the appropriate minimum pressure to grip the
sample.
4 Upper clamp closure rate control
(knob)
When adjusting this control, ensure the closure rate is
not so high as to damage fragile samples.
5 Lower clamp closure rate control
(knob) When adjusting this control, ensure the closure rate is
not so high as to damage fragile samples.