MTS Model 506-62-72 Hydraulic Power Supply - Manual (Page 30)

4-2 Installation
4.1 Hydraulic Connections
The pressure, return and drain connections are located on the HPS
manifold shown in Figure 4-2. Refer to the system hydraulic
distribution drawing in the Assembly Drawings system reference
manual for hydraulic connections that are specific to your system.
Hydraulic connections Hydraulic hose connections from the HPS are made to the ports
labelled P (pressure) and R (return) on the HPS manifold. These
connections are typically made to a system servovalve manifold,
hydraulic service manifold, or hydraulic distribution manifold. The
HPS has drain ports for any drainback connections used by the system.
HPS – Side View
VW-G044L
Drain
ports
Return
ports
Pressure
ports
Figure 4-2. Hydraulic Connections
N O T E Table 1-2 shows the specifications for the ports shown
in Figure 4-2.