MTS Model 293-22 Hydraulic Service Manifold - Manual (Page 18)

Description Name Item
Viewing angle Front View of the Control
Manifold C
Reduces pressure and flow fluctuations resulting from changing
system demands. Return Accumulator 1
Reduces pressure and flow fluctuations at the pilot pressure
port. Pilot Pressure Accumulator
(optional) 2
Reduces pressure and flow fluctuations resulting from changing
system demands. Pressure Accumulator 3
Indicates system hydraulic pressure. Pressure Gage 4
Distributes hydraulic fluid between the HPU and up to two
control manifolds or a distribution manifold. Main Manifold 5
Allows high-pressure hydraulic fluid to be output to the hydraulic
channel. High-Pressure Solenoid Valve 6
Allows low-pressure hydraulic fluid to be output to the hydraulic
channel. Low-Pressure Solenoid Valve 7
Distributes hydraulic fluid to and from a single hydraulic
channel. A hydraulic channel is usually associated with an Control manifold 8
actuator and a servovalve. The control manifold also contains
a low-pressure solenoid valve, a high-pressure solenoid valve,
a main valve, a slow turn-on valve, and a pressure gage.
Fills to extend the pressure rise time and slowing the rate at
which the main control valve operates. Slow Turn-On Accumulator 9
Sets the low-pressure output of the hydraulic channel. Low-Pressure Adjustment 10
Filters the hydraulic fluid as it is input to the pilot pressure
circuit. The filter has a visual indicator to signal when the
element requires replacement. Pilot Pressure Filter (optional) 11
Filters the hydraulic fluid as it is input to the main manifold. The
filter has a visual indicator to signal when the element is
requires replacement. Main Filter 12
18 | Model 293.22 Hydraulic Service Manifold
Introduction