MTS Model 293-22 Hydraulic Service Manifold - Manual (Page 35)

Note:
Connect the Drain Out line hose to the HPU reservoir or the drain circuit on the hardline before you
apply hydraulic pressure.
Note:
Remove a fluid cap port plug only when a hose is ready for connection. Retain these plugs for use
during service.
Hydraulic Connections
Description Item
Pressure P
Return R
Drain D
Pilot Pressure PP
Pilot Pressure Return PR
Hydrostatic Bearing HB
Hydrostatic Bearing Supplied Pressure HBS
Hydrostatic Bearing Controlled Pressure HBC
Model 293.22 Hydraulic Service Manifold | 35
Installation