MTS Series 315 Load Frame - Manual (Page 12)

Series 315 Load Frame 12 Introduction
Model 315.01 Model 315.02 Model 315.03 Model 315.04
Dimensions
*
* Refer to the figure below for dimension locations.
mm in mm in mm in mm in
A 2184 86 2337 92 2692 106 2972 117
B 711 28 914 36 1016 40 1143 45
C 483 19 610 24 737 29 737 29
D 686 27 864 34 953 37.5 1143 45
E 305 12 305 12 356 14 356 14
F 635 25 787 31 965 38 1041 41
G †
† The minimum dimension is with the actuator rod fully extended; the maximum dimension is with the
actuator rod fully retracted.
868 min
970 max 34.2 min
38.2 max 868 min
970 max 34.2 min
38.2 max 868 min
970 max 34.2 min
38.2 max 1160 min
1262 max 45.7 min
49.7 max
H 457 18 457 18 546 21.5 686 27
J
‡
‡ This dimension applies to the piston rod and the accessory attachment plates for the piston rod and
crosshead.
191 7.5 305 12 381 15 381 15
K 640 25.2 805 31.7 927 36.5 927 36.5
L 74 2.94 74 2.94 74 2.94 74 2.94
M 432 17 483 19 584 23 584 23
N 229 9 312 12.3 406 16 406 16
Weight of each
accessory
attachment
plate (L) §
§ Both accessory attachment plates must be removed to use a Model 656 Triaxial Cell in the load frame.
18 kg 40 lb 43 kg 95 lb 68 kg 150 lb 68 kg 150 lb