MTS Model 286-30 Pore Pressure Intensifier - Manual (Page 42)

286.30 Pressure Intensifier 42
Operating Procedures
Operation
Draining the Reservoir to an External Location
To drain the reservoir:
1. Insert the end of the hose from the Drain/Fill valve into an external
container.
2. Open the Drain/Fill valve.
Pressurizing and Depressurizing the Pore Fluid
9 - Open
2B - Close
2E - Open
8 - Close
(Procedural steps not shown are performed
on the controller equipment.)
(closed)
2C - Open
2D - Close
(closed)
(initially
closed)