MTS Model 493-04 PC-Per-Station Kit - Manual (Page 10)

MTS Model 493.04 PC-Per-Station-Kit
Install the Network Adapters
10
Task 1 Install the Network Adapters
How to Install a Network Adapter
See the documentation that came with your network adapter for detailed
hardware installation and configuration instructions.
1. Disconnect power from the PC.
2. Remove the chassis cover from the PC and install the network adapter(s).
3. Replace the chassis cover and apply power to the PC.
4. Install the software drivers required by your network adapter.
Important Configure the network adapter to turn on TCP and IP CRC off
loading feature.