MTS Model 493-04 PC-Per-Station Kit - Manual (Page 11)

Install the Network Switches
MTS Model 493.04 PC-Per-Station-Kit 11
Task 2 Install the Network Switches
How to Install PC-Per-Station Network Switches
The switches provided with this kit include autodetect features that allow you to
plug MDI or MDIX cables in any of the ports.
Network connections 1. Use an Ethernet cable to connect the controller processor board to the
network switch.
You can use an existing “crossover” cable (MDIX) or one of the straight-
through cables (MDI) provided with the kit.
2. Connect the network switches to the Ethernet network adapters.
3. Attach the “Controller-Dedicated Network” and the “General Data
Network” label to the appropriate network switch.
For more information
For detailed cable specifications, see Ethernet Cable Requirements on page 6
MTS Systems Corp. 14000 Technology Dr. Eden Prairie, MN 55344-2290 USA Final Assy No. Model Serial
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
LAN 2
LAN 1
DEBUG
MOTOROLA
10/100 BASE T
10/100 BASE T
SCSI BUSY
PIB BUSY PCI MEZZANINE CARD
PCI MEZZANINE CARD
LAN 2
LAN 1
DEBUG
MOTOROLA
10/100 BASE T
10/100 BASE T
SCSI BUSY
PIB BUSY PCI MEZZANINE CARD
PCI MEZZANINE CARD 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Controller
Electronics
Master PC
Dependent PC
Controller Dedicated
Ethernet network adapter
Controller
Dedicated
Network
Switch General-Data
Network
Switch
Note This drawing shows the 2-PC Kit. To install the 3-PC Kit or 4-PC Kit, install network
adapters in the additional PCs and connect to the network switches as shown.
Controller Dedicated
Ethernet network adapter
General Data Ethernet
Network Adapter
General Data Ethernet
Network Adapter