MTS Multipurpose Getting Started - Manual (Page 12)

Run Button
The test executes for approximately 20 seconds. While the test runs, a Hysteresis and History graph
shows runtime data. When 100 cycles are complete, a Creating Report progress bar appears, followed
by a test report in Microsoft Excel.
10. (Optional) In the work area, click the Results tab to view the results of the test run.
1.2.6.0 View the Example LCF Test Report
A test report has been configured to appear automatically at the end of the test run. The elements in this
report were defined in a report template designed with the MTS TestSuite Report Add-In for Excel.
12 MTS TestSuite
1.0 Introduction