MTS Model 632-85 Biaxial Extensometer - Manual (Page 11)

Model 632.85 Biaxial Extensometer Installation 11
Installation
Specimen Mounting
The extensometer is mounted on the specimen by the use of the conical points.
Perform the following procedure to mount the extensometer on a specimen.
Item Description
1 Axial sensor unit A
2 R dimension
3 Axial sensor unit B
4 Compliance flexure
5 Remove screws on underside of compliance flexure to
separate the slide bracket form the compliance flexure.
6 Slide bracket
7 Loosen these screws to adjust for specimen dimension R
8 Positioning arm
9 Grip pads
10 Location for zero set spacer
11 Transverse sensor unit
12 Axial gage length