Behringer Europower PMP518M - Manual (Page 10)

behringer.com
10 EUROPOWER PMP518M User Manual
Specifications 6.
Microphone Inputs
Type XLR, electronically balanced
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -122 dB / -125 dB A-weighted
@ 50 Ω source resistance -122 dB / -125 dB A-weighted
@ 150 Ω source resistance -121 dB / -124 dB A-weighted
Frequency response < 10 Hz - 100 kHz (-1 dB),
< 10 Hz - 200 kHz (-3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ 10 dB gain
Impedance approx. 2.2 kΩ balanced,
1.1 kΩ unbalanced
Signal-to-noise ratio 110 dB/114 dB A-weighted
(-11 dBu in @ +33 dB gain)
Distortion (THD+N) 0.001% / 0.0008% A-weighted
Mono Line Inputs
Type 1/4" TRS connector, balanced
Impedance approx. 80 kΩ balanced,
40 kΩ unbalanced
Max. input level +30 dBu
EQ
Low 80 Hz / ±15 dB
High 12 kHz / ±15 dB
Main Mix System Data
Noise
Main mix @ -∞, -106 dB / -110 dB A-weighted
Channel fader -∞
Main mix @ 0 dB,
-87 dB / -90 dB A-weighted
Channel fader -oo
Main Mix @ 0 dB,
-80 dB / -82 dB A-weighted
Channel fader @ 0 dB
Loudspeaker Outputs
Type Neutrik Speakon-compatible,
1/4" TS connectors
Load impedance 4-16 Ω
DSP
Converter 24-bit Sigma-Delta,
Sampling rate 40 kHz
Display
Type 2-digit, 7-segment LED
Amplifier
Output power 62 W (8 Ω), 105 W (4 Ω)
(RMS @ 1 % THD (sine wave))
Output power
100 W (8 Ω), 180 W (4 Ω)
(Peak Power)
Power Supply
Mains voltages
U.S./Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
General export model 120/230 V~, 50 - 60 Hz
Power consumption max. 290 W
Fuse 100 - 120 V~: T 6.3 A H 250 V
220 - 240 V~: T 3.15 A H 250 V
Mains connection Standard IEC receptacle
Physical / Weight
Dimensions (H x W x D) approx. 4 3/5 x 18 1/2 x 8 7/8"
approx.117 x 470 x 225 mm
Weight (net) approx. 15.88 lbs / 7.2 kg