Brother HL-5450DNT - Manual (Page 47)

41
Driver and Software
2
Accessories tab
2
Note
To access the Accessories tab, see Accessing the printer driver settings uu page 25.
You can define the paper size for each paper tray and auto detect the serial number in the Accessories tab
as follows.
 Available Options / Installed Options (1)
You can manually add and remove the options that are installed on the machine. Tray settings will match
the installed options.
 Paper Source Setting (2)
This feature identifies the paper size defined for each paper tray.
• Paper Size
This setting allows you to define which paper size is used for each tray. Highlight the tray you want to
define and then choose the paper size from the pull-down menu. Click Update to apply the setting to
the tray. When using more than one paper size you must define the paper size for each tray so the
paper is pulled from the correct tray.
• Default Source
This setting allows you to choose the default paper source that your document will be printed from.
Choose the Default Source from the pull-down menu and click Update to save your setting. The
Auto Select setting will automatically pull paper from any tray that has a defined paper size that
matches your document.
 Serial No. (3)
By clicking Auto Detect (4), the printer driver will probe the machine and display its serial number. If it fails
to receive the information, the screen will display “---------------”.
1
2 3
4